Basic Info.
Certification
ISO9001, CE, Iaf
Application
Turbine Oil, Lubricant Oil, Transformer Oil, Engine Oil, Tyre Oil, Plastic Oil
Voltage
220V-415V-50Hz-60Hz
Item Name
Diesel From Used Old Oil Distillation Plant
Working Vacuum
-1 ~ -20 PA
Working Noise
45-80 dB(a)
Flash Point(Open)
60centigrade
Viscosity(15centigrade)
0.84kg/L
Temperature
Less Than 350 Centigrade
Power Supply
220-380V.50-60Hz (Customizable )
Dimension(L*W*H)
45*16*6.5m
Function
Waste Oil Distillation Plant
Final Product
Clean Base Oil/Diesel Oil
Product Description
1.Product Name: Diesel From Used Old Oil Distillation Plant
Item Name | Diesel From Used Old Oil Distillation Plant |
Application | Used engine oil, waste industrial lubricant oil recycling,waste lube oil distill base oil ,waste hydraulic oil distill base oil ,4s store waste engine oil distill base oil and waste oil distillation. |
2.Waste Oil Molecule Distillation Plant Usage
It is widely used in the waste lube oil distill base oil ,waste hydraulic oil distill base oil ,4s store waste engine oil distill base oil and waste oil distillation and refineing ,etc .The waste oil short distance molecule distillation plant adopt high vacuum molecule distillation process,it can regenerate waste oil into base oil,low cost ,85% high recovery rate ,environmental and energy saving .It's the first choice for the used oil regeneration project ,with great economic and social benefits .
3. Application of the Used Old Oil Distillation Plant4. Waste Oil Molecule Distillation Plant Process
It adopts high vacuum, atomization and flash distillation technology ,with below features :4.1.1 Low working temperature (much lower than the boiling point), high vacuum (no load ≤ 5Pa), short heating time (in seconds), high efficiency separation, etc. Especially suitable for substance separation with high boiling point, heat sensitivity and easy oxidation .4.1.2 It can remove low molecular substances (deodorization), heavy molecular substances (decolorization) and remove impurities in the mixture effectively.4.1.3 The separation process is the physical separation process, which well protected the oil without be polluted secondary, especially for maintaining the oil quality when extracting.4.1.4 With high degree of separation and high vacuum molecular distillation technology, which is more efficiency than the traditional distillation and ordinary thin film evaporator.4.1.5 With specialized chemical catalysts and additives, even if under normal pressure, when the waste oil is heating up to 400 ºC, there will be no obvious oil cracking.While under normal pressure, the oil begin to carbonization and coke when the waste oil heating up to 300 ºC without any catalysts, so the recycling oil quality will be reduced and the recovery rate will be decreased too. Because there are much colloid, asphalt, free carbon and other impurities in the waste engine oil, only by catalysts, it can prevent these substances from coking effectively, guaranteeing prolong the machine's life time and improving the oil recovery rate of the waste oil.4.2 Oil separation according to the different distillation temperature(liquid-liquid separation), we can get light gasoline/diesel,light base oil, heavy base oil .4.2.1 When the oil heated to 180-270ºC,300-500Pa vacuum degree ,light gasoline/diesel components will be pulled out ;4.2.2 When the oil heated to 280-300ºC,200-300Pa vacuum degree ,light base oil components will be pulled out ;4.2.3 When the oil heated to 300-350ºC,20-50Pa vacuum degree ,heavy base oil components will be pulled out .Cut fractions through condensing then collect to oil tanks .4.2.4 The residual oil, light component and extracted oil produced during the process are sold as the by-products of industrial fuel oil.4.2.5 Waste oil distillation plant and auxiliary facilities are all sealed, tail gas is collected , and combustion in heating furnace .There is no exhaust in production .4.2.3 Our technology no need to pretreat the waste oil material ,without acid alkaline wash and clay process ,no waste residue discharge .4.2.4 The waste oil material contains water about 3-5%,it will distilled and condensed during process .There also has 2~3% steam water will be condensed during later refining process .After aeration flotation, the two parts of the oily water can be discharged into the sewage pipe line in the park.5. Economy Benefits5.1 The recovery rate of the base oil is generally 85%, but it is mainly determined by the waste oil material quality. The waste engine oil from 4s stores is better ,however, the used oil collected from marine diesel engine usually is worse in quality.
5.2 General recovery rate (suppose waste oil material without water) :
5.2.1 Light industrial fuel oil 5~10%
5.2.2 Heavy industrial fuel oil 8~15%
5.2.3 Diesel 85~90%
5.2.4 With full automation and easy operation, it can be managed easily by only 1 or 2 persons. It takes about 3 or 4 days for you to learn how to opertate the distillation plant.Recycled Base Oil Parameter:
Factory Workshop:
Carbon Steel TanksOur Packaging:FAQ
Q1. What's the final product after process ?A. 80% -85% base oil, 5% light oil, or 85% -90% diesel. Q2. Does your process use catalyst?A. Yes, catalyst will keep the recycled oil stabilization, used that recycled oil oxidized andbecome black again. So the recycled oil from our machine will keep good color. Q3. Can the treated oil be used in engines directly?A. Yes, the treated diesel can be used in engines directly, like trucks, ships etc. Q4. Is your machine running continuously?A: Yes, our machine is running 24hours continuously. Our machine can also beswitched into batch by batch, according to your labor working time.
Address:
Xingfu Subdistrict, Shitigou Community, Xinqiao Village, Qinjiagang Town, Shapingba District, Chongqing, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001
Company Introduction:
Chongqing kaiqian oil purifier manufacture Co., Ltd was founded in 2008, and it was located in shapingba district, chongqing, China. It is a high-tech enterprise which was specialized in researching, designing and producing waste oil recycling machines. We stick to the principle of quality first, service first, continuous improvement. We do all kinds of waste oil recycling machine, including used engine oil, used motor oil, used car oil, tire oil, plastic oil, any pyrolysis oil, transformer oil, hydraulic oil, turbine oil, and any other industrial oils.